Spray cooling figure_喷雾景观|人造雾|喷雾降温|喷雾除尘|工业加湿设备|车辆消毒通道|人员消毒通道|喷雾除臭设备|雾森设备|喷淋消毒设备-常州恒蓝空气净化设备有限公司,
English
中文
PRODUCTS
>>  Deodorization disinfection sys
>>  Spray cooling system
>>  Fountain equipment
>>  Dehumidification equipment
>>  Humidifying device
>>  Air purification equipment
>>  Landscape make fog equipment
CONTACT US
Changzhou heng lan air purification equipment co., LTD
Mobile:15061138675
TEL:0519-88296566
After-sales:0519-83714089
E-MAIL:henglan01@126.com
WEB:www.cz-henglan.com
ADD:Wujin District, Changzhou City, Jiangsu Province
Spray cooling system

Spray cooling figure


Spray cooling system
Since the world expo in Shanghai after the installation of the spray cooling system, the domestic industry began to install, after some outdoor places such as xian the park, guangzhou BRT station, shenzhen baoan airport, along abundant express, and so on have installed the spray cooling system cooling. Now the spray cooling technology has been more and more mature, more and more close to life.
Now many bus station and railway station have already installed the cooling equipment, but some people may worry about heavy fog emit the moisture easier rheumatism, here, I explain, spray equipment mist spewed by only 1-15 microns, coupled with the hot weather, so ejective mist comes out is evaporated, plus is open, so you will feel no moisture. If is airtight place, also clear, because the machine with moisture detector, when the humidity reaches a certain degree, the machine automatically shut down. When the humidity is below the set, and can automatically open. So I promised, and install spray is never affect the moisture in the station.
Actually install this kind of the most important is a quality problem, because the station using spray cooling, spray the fog particles will direct contact with the human body. If the water quality standard is easy to harm human body; So the water spray with must deal with.
Shanghai letter Beijing air purification equipment co., LTD., dedicated to the bus station, railway station, airport has developed a set of spray cooling system, it has the characteristics of high efficiency and energy saving, reliable operation, safety and health. Letter of the company since was established in 20011, has been engaged in the r&d and production of spray equipment, the study of spray equipment has reached the point of perfection. In 2011, the independent research and development has a set of spray cooling equipment for industry. We specially designed according to different water quality at different sites of different industries of different spray cooling system.
Letter to Beijing a few characteristics of spray cooling system:
1, atomization effect is good, cool quickly:
Equipment using top spray technology, fog ultrafine grain, diameter of only 3-15 um, smoke shaped, fast into the air. The mist amount can be adjusted freely, in a short period of time can quickly achieve the cooling effect..
2, full automatic intelligent control:
Automatic high-pressure spray cooling system, has an automatic device and the temperature and humidity automatically detecting control system, USES the intelligent temperature and humidity sensor, control accuracy error within the plus or minus 3%, humidity controller control range can be set in a randomly from 1% RH to 1% RH, device can automatically control key time within the set value, without staff duties, realize unmanned management.
3, multipoint control integration:
Automatic high pressure spray cooling system, equipped with multipoint control integration of intelligent instrument, the host through the set according to the temperature and humidity control system for automatic control and detection of humidity and temperature display screen on the host. For customers to understand the on-site temperature humidity at any time.
4, high efficiency and energy saving:
The output of the high pressure micro fog flow from 120 kg/h ~ 1500 kg/h, can be stepless adjustment, within the scope of the flow nozzle number of arbitrary configuration.
The micro fog humidification equipment working principle is: high pressure plunger pump to the treated water pressure to 7 mpa, through high pressure pipe to cool evenly distributed in the environment of atomization nozzle, water is atomized into tiny droplets of 3 ~ 15 microns particles into the cool space. Water mist and the flow of air to heat exchange, massively absorb heat from the air (sensible heat), evaporation, so as to achieve the purpose of cooling.
 

上一篇:Spray cooling figure   下一篇:Tengger desert scenic spot spray cooling

HOME   |  ABOUT US   |  PRODUCTS   |  NEWS   |  CASES   |  VIDEO   |  CONTACT US
Copyright:Changzhou heng lan air purification equipment co., LTD  |  苏ICP备16059454号